Kernel and system Parameter setup
- dadson05
- Topic Author
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
14 years 7 months ago #4825
by dadson05
Kernel and system Parameter setup was created by dadson05
version ---T24 R08
jbase version --jbase5_5.0.22
operating system AIX 6L
display mode browser
browser version
Browser_R08.005.09
please what will be the kernel and parameter settings for AIX using all the above .
jbase version --jbase5_5.0.22
operating system AIX 6L
display mode browser
browser version
Browser_R08.005.09
please what will be the kernel and parameter settings for AIX using all the above .
Please Log in or Create an account to join the conversation.
- Thushantha
- Offline
- Junior Member
Less
More
- Posts: 31
- Thank you received: 1
14 years 7 months ago #4888
by Thushantha
Replied by Thushantha on topic Re:Kernel and system Parameter setup
Hellow,
Your question is not clear and need further information. Do you have multi tier enviroment or everything running in one AIX box.
There are many parameteres available on AIX to setup. There are some standard parameters to setup also there are tuning parameters.
Also let me know if you are facing specific issue with AIX ?
Thanks
Thushantha
Your question is not clear and need further information. Do you have multi tier enviroment or everything running in one AIX box.
There are many parameteres available on AIX to setup. There are some standard parameters to setup also there are tuning parameters.
Also let me know if you are facing specific issue with AIX ?
Thanks
Thushantha
Please Log in or Create an account to join the conversation.
- dadson05
- Topic Author
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
14 years 7 months ago #4889
by dadson05
Replied by dadson05 on topic Re:Kernel and system Parameter setup
thanks,
DBA=jbase
RELEASE=R08
AIX 6.1
Fresh installation is what am doing.
it is multi-tier Application. standard parameters for AIX operating system is what l need.
on linux operation system l make setup on /etc/sysctl.conf
/etc/sysctl.conf, l set Setting IP Local Port Range, /etc/security/limits.conf for ulimit and net.core.rmem_default,
net.core.rmem_max,
net.core.wmem_default,
net.core.wmem_max etc all such setups is what l and requesting on AIX please.
regards
DBA=jbase
RELEASE=R08
AIX 6.1
Fresh installation is what am doing.
it is multi-tier Application. standard parameters for AIX operating system is what l need.
on linux operation system l make setup on /etc/sysctl.conf
/etc/sysctl.conf, l set Setting IP Local Port Range, /etc/security/limits.conf for ulimit and net.core.rmem_default,
net.core.rmem_max,
net.core.wmem_default,
net.core.wmem_max etc all such setups is what l and requesting on AIX please.
regards
Please Log in or Create an account to join the conversation.
- Thushantha
- Offline
- Junior Member
Less
More
- Posts: 31
- Thank you received: 1
14 years 7 months ago #4890
by Thushantha
Replied by Thushantha on topic Re:Kernel and system Parameter setup
Hellow,
Are you using trusted Computing base AIX installation or general AIX installation.
I can recomend some parameters but , all depends on your hardware availability.
minperm , paging , ulimit , Maximum number of PROCESSES allowed per use, If you can share the hardware sizing and the number of concurrent users i can recomend some parameter values.
Thanks
Thushantha
Are you using trusted Computing base AIX installation or general AIX installation.
I can recomend some parameters but , all depends on your hardware availability.
minperm , paging , ulimit , Maximum number of PROCESSES allowed per use, If you can share the hardware sizing and the number of concurrent users i can recomend some parameter values.
Thanks
Thushantha
Please Log in or Create an account to join the conversation.
- dadson05
- Topic Author
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
14 years 7 months ago #4891
by dadson05
Replied by dadson05 on topic Re:Kernel and system Parameter setup
Thanks Thushantha,
Am using a licensed trusted AIX installation. for the Development partition t24dev hardware is mounted on to file systems /usr/jbase5 for jbase5 installation and /t24app for my bnk both adding up to 2TB.
thanks
Am using a licensed trusted AIX installation. for the Development partition t24dev hardware is mounted on to file systems /usr/jbase5 for jbase5 installation and /t24app for my bnk both adding up to 2TB.
thanks
Please Log in or Create an account to join the conversation.
- dadson05
- Topic Author
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
14 years 1 day ago #6050
by dadson05
Replied by dadson05 on topic Re:Kernel and system Parameter setup
Multi tier Apps servers on AIX6.1
l need standard parameters and tuning parameters.
please
l need standard parameters and tuning parameters.
please
Please Log in or Create an account to join the conversation.
Time to create page: 0.077 seconds